Rain for Rent
 Pump, Tank, Pipeline & Filtration RENTALS   800-742-7246
Complete Solutions...Proven Results™

 

Pump Rentals & Sales: All Types of Pumps – Centrifugal Pumps, Diaphragm Pumps, Submersible Pumps (Dewatering or Trash Pumps) and More
See also Pump Training and check out our Pump Testing Facility.

Need to buy a pump, all our pumps are available with diesel or electric power, trailer or skid mounted and with the Silenced Package. Contact our Sales Department for more information.
 
All Rain for Rent manufactured pumps have an end suction centrifugal pump with a fully automatic priming system incorporated into the design. This enables the pump to self-prime from completely dry conditions, even with extended suction lines. Liquid is not required to prime the pump, and therefore, in temporary dry conditions, the pump will 'snore' until such time as liquid is available

Specs available for configurations indicated by icons below.
= Diesel = Electric = Silenced Pump Package
 

Power Prime Centrifugal Pumps

Rain for Rent offers end suction, self priming, vacuum assisted centrifugal pumps in sizes ranging from 3 inch suction and discharge connections up to 24 inch. Units can be skid mounted or trailer mounted, engine drive or electric motor driven. All units are high efficiency and produce higher than industry standards for flow rates and operating pressures. These pumps are available in many materials ranging from, cast iron, sg iron, stainless steel (SS) or CD4MCU materials. Rain for Rent offers a wide selection of its pumps in sound attenuated enclosures or in general terms “quiet pumps” with ultra low DBA (decibel) ratings, which are well suited for all type of bypass work from fresh water, canal, river or stream or sewer bypassing in residential or remote areas   
DV-80   DV-80M   DV-100  
3", 500 GPM max, 138’ Ft Head max centrifugal pump.   3”, 600 GPM Max, 95' Head max, centrifugal pump   4", 800 GPM max, 115' head max, centrifugal pump  
Size is 3" x 3"
500 GPM maximum
138 FT Head maximum 		  Size 3” X 3”
600 GPM Max
95 Ft Head Max		   Size is 4" x 4"
800 GPM maximum
115 FT Head maximum		  
<< More Information >>   << More Information >>   << More Information >>  
     
           
DV-150   DV-200   DV-200c  
6". 2250 GPM max, 160' head max centrifugal pump   8", 3100 GPM max, 152' head max centrifugal pump   8", 4500 GPM max, 255' head max centrifugal pump  
Size is 6" x 6"
2,250 GPM maximum
160 FT Head maximum		   Size is 8" x 8"
3,100 GPM maximum
152 FT Head maximum 		  SIZE 12”x8”
4,500 GPM maximum
255 FT Head maximum
81% Hydraulic Efficiency		  
<< More Information >>   << More Information >>   << More Information >>  
     
       

or

  
       

 
DV-300   DV-300i      
12", 5000 GPM max, 100' head max centrifugal pump   12", 6900 GPM max, 197' head max centrifugal pump      
       
Size is 12" x 10"
5,000 GPM maximum
100 FT Head maximum		   Size 12” x 12”
6,900 GPM maximum
197 ft head maximum		      
<< More Information >>   << More Information >>      
       
    or      
         
DV-350c   DV-400   VMX-150  
14", 13500 GPM max, 180' head max centrifugal pump   18", 16000 GPM max, 200' head max centrifugal pump   6", 2300 GPM max, 160' head max centrifugal pump  
     
Size 14” x 14”
13,500 GPM MAX
180 FT. HEAD MAX		   Size 18” X 16”
16,000 GPM Max
200 Ft. Head Max		   Size 6” X 6”
2,300 GPM Max
160 Ft Head Max		  
<< More Information >>   << More Information >>   << More Information >>  
     
           
VP-150   VP-500  

Power Prime Centrifugal Pumps at work

  
8", 2250 GPM max, 110' head max centrifugal pump   24", 22000 GPM max, 123' head max centrifugal pump    
     
Size is 8" x 6"
2,250 GPM maximum
110 FT Head maximum		   Size is 24" x 20
22,000 GPM maximum
123 FT Head maximum 		    
<< More Information >> << More Information >>
     
           

High Head Centrifugal Pumps

From 3” to 8” the Rain for Rent High Head (high pressure) Pumps provide flows from 450 to 4,500 Gallons per minute (GPM) and provide discharge pressures up to 260 psi or 605 ft. These pumps are ideal for applications that require a higher heads or pressures like mine dewatering, fire protection, force main pumping, evaporation systems and bypass applications. Our clear water pumps are used in agricultural, construction, and general service application

HH-80 3 x 3   HH-125 6 x 4   HH-150 8 x 6  
3", 450 GPM max, 300' head max high head pump   6", 800 GPM max, 370' head max high head pump   8", 2250 GPM max, 320' head max high head pump  
Size is 3" x 3"
450 GPM maximum
300 FT Head maximum 		  Size is 6" x 4"
800 GPM maximum
370 FT Head maximum		   Size is 8" x 6"
2,250 GPM maximum
320 FT Head maximum 		 
<< More Information >>   << More Information >>   << More Information >>  
     
or       or  
       
HH-200i   XH-100 6 x 4   XH-150 8 x 6  
8", 4500 GPM max, 450 head max high head pump   6", 1250 GPM max, 605' head max high head pump   8", 2400 GPM max, 605' head max high head pump  
Size 8” X 8”
4,500 GPM Max
450 Ft Head Max 		   Size 6” X 4”
1,250 GPM Max
605 Ft Head Max		   Size 8” X 6”
2,400 GPM Max
605 Ft Head Max		  
<< More Information >>   << More Information >>   << More Information >>  
     
    or   or  
       
Cornell Med Head   Cornell High Head  

 
Clear Water Ag Pumps - flows to 4400 GPM   Clear Water H Series pumps, flows to 1600 GPM    
ClearWater Ag Series -
Flows Up To 4,400 GPM
Up To 370 Ft Head 		  ClearWater H Series -
Flows Up To 1,600 GPM
Up To 475 Ft Head 		    
<< More Information >> << More Information >>
     
or   or      
       

Submersible Pumps and Air Compressed Pumps

Submersible pumps (sometimes referred to as trash pumps or dewatering pumps) are used for all types of general de-watering and fluid transfer, and are the pump of choice when suction lifts of greater than 28 ft are anticipated. These units are electrically driven and can be operated on 110 volt, 240 volt or 480 volt services. This power can come from a fixed source or from a generator set  

 Air Operated Diaphragm Pumps (AOD’s) are perfect for applications that require pumping of fluids with varying viscosities. The pump, since it operates off of air, is explosion proof by design, a variable speed pumping rate can be achieved by simply regulating the amount of air that to the pump. The unit can also be fully submerged into the fluid with no side effect to the pump or liquid with very minor alterations.
Air Diaphragm   Submersible   Hydra Tech  
Air Diaphragm pump - 2-3"   Trash / dewatering pumps - 3" to 12"      
       
Primarily
2" and 3" units		   Trash /Dewatering Pumps
Size 3” to 12”
Flows Up To 5,000 GPM
Up To 310 Ft Head		   Trash / Sewage / Wastewater Pumps
Size 4” to 6”
Flows Up To 1,600 GPM
Up To 110 Ft Head		  
<< More Information >>   << More Information >>   << More Information >>  
     
   

or

      
   

     
           
   

Power Prime Pumps with Silenced Packge at work.

  
Silenced Package

----->>

    
     
     
     
           
 

See our pumps in action?

Rain for Rent Rental Pumps

Schedule a demonstration
today with one of our
Rain for Rent professionals.

Schedule a Demo Now!
 


Practical solutions
for pumps

 
Tempe Town Lake 85MGD Sewer Rehabilitation

This system successfully bypassed a peak flow of  85 MGD with a maximum pipeline capacity designed  to handle 110 MGD.

Tempe Town Lake is one of Arizona's most popular urban outdoor destinations, with more than two million people visiting each year to boat, fish and attend concerts, firework shows and a variety of festivals.  It is also one of the fastest growing urban areas in the United States.
> the whole story.

After Hurricane Katrina

The Mississippi Coast was slammed with horrendous winds and an estimated 30' wall of water affecting vital infrastructures. Major power generating plants, chemical plants, municipal water and sewer facilities, and communications were severely damaged or totally inoperable.  Beach front property was now non-existent as the houses and businesses that once supported the economy were completely destroyed.

In New Orleans, storm water surge and severe winds from Hurricane Katrina caused large sections of the 17th Street Canal levee to wash away. The breach allowed water from Lake Pontchartrain to pour into the city, destroying lives, homes and businesses.  > the whole story

Taunton Dam Project

The fall of 2005 was one of the wettest seasons in New England’s recorded history.  The incoming rainfall, coupled with the already surcharged reservoir system, was proving to be a challenge for local municipalities especially in Taunton, Massachusetts.  Downstream from Taunton lies the Whitten Dam, a timber built structure that has successfully held back the water of the Mill River for 173 years … until recently. > the whole story.

South Alamo Canal Bypass
 The Calexico East Port of Entry is one of the busiest crossing points between the U.S. and Mexico.  To accommodate increased commercial and passenger traffic, the State of California is constructing State Route 7 (SR-7) to connect the port of entry with I-8 in southern Imperial County.

SR-7 cuts across prime farmland where about half of the winter lettuce and vegetables consumed in the United States and Canada are grown. The Imperial Irrigation District (IID) supplies water to this farmland. The IID in Imperial County, California is the largest irrigation district in the United States.  The new road will cross several canals owned and operated by the IID. > the whole story

Pond Evaporation

 Excess rainfall and snow left an environmental remediation company looking for a solution to remove excess water from the surface holding ponds at an abandoned copper sulphate mine which is located in a northern California mountain range.

Due to the remote location, 7000 foot elevation, and limited access to the mine site...> the whole story
 
 
Rain for Rent's exclusive Power Prime Pumps are built to make your job easier.

Features
Continuous self-priming
Run dry unattended
24-hour fuel tank
Suction lifts up to 28 feet
Galvanized chassis
Fuel efficient
 
Packages
Skid or Trailer mounted
Silenced package option
Electric or diesel power
 
Material Specifications
Standard Build
Perkins, John Deere and Caterpillar
Stainless steel shafts, impellers and wear plates
Oil lubricated mechanical seals
Galvanized skids, trailers, lift bales, radiator enclosures, battery box and wheels
Electric brakes
DOT LED lights
Zinc plated drop leg jacks
 
Special Material Builds
CD4MCu
High Crome Steel wear parts
Stainless Steel