Liquid Ingenuity® 
HH80E 3″x3″ Electric Pump
- Discharge Flange3"
- Dry WeightN/A
- Footprint 84.50” x 38.75”
- Fuel CapacityN/A
- Impeller Diameter12.8"
- Max Flow380 GPM
- Max Head180 ft
- Priming MethodSelf-Priming
- Pump Size3"x3"
- Solids1"
The 3” suction x 3” discharge self-priming centrifugal HH80E electric high head pump provides up to a maximum of 380 gallons per minute pumping and up to 180 feet of head. This pump is usually mounted on a skid and features the standard PowerPrime Clean Prime Venturi priming system which allows it to run continuously, unattended and even run dry.
Features
Accessories
Specs
- Continuous self-priming
- Runs dry unattended
- Compressor fitted to operate the air-ejector priming system
- 3 vane, 12.8”, 316 stainless steel impeller
- Suction lift up to 28ft.
- Hot Dip Galvanized Open Skids with fork lift tubes
- Four corner bolt down angles
- Chrome and CD4MCu pump end options
- 40hp 60Hz TEFC hostile duty dual voltage (230/460V) motor
- Fitted 480 volt control panels are equipped with motor protection
- Panels are equipped with terminal blocks for remote float switches
- Spillguard
- Variable Frequency Drive
- Maximum Flow 380 GPM
- Maximum Head 180 feet
- Pump Size 3” x 3”
- Maximum Solids Handling 1 inch
- Operating Speed 1760 rpm
- Footprint 84.5” x 38.75”
